Drawing processing of stainless steel sheet metal parts

Drawing processing of stainless steel sheet metal parts

The parts shall be processed correctly according to the drawings. All edges and sharp edges should be blunt, and the height of burrs and flash should not exceed 0.2mm. In principle, it is based on the principle of no stroke.

The solid parts and objects shall conform to the selected specifications or drawings. The surface treatment of screws, bolts, nuts, flat washers and spring washers shall comply with the requirements of the drawings. If the screw is broken, the screw should be able to be screwed in smoothly with appropriate tightness. On the surface of some sheet metal chassis cabinets with poor quality, we often see sundries on the base, serious color difference, falling off of coating, paint flow, powder deposition and other conditions, which are actually caused by some mistakes in the sheet metal processing process of sheet metal chassis cabinets.

QUICK LINKS:>>> Sheet Metal Frame | Sheet Metal Housing | Sheet Metal Chassis | Metal Kiosk Enclosure | Sheet Metal Cover | Sheet Metal Parts Components | China Sheet Metal Manufacturer | Custom Sheet Metal Parts | Metal Enclosure Manufacturers | Sheet Metal Cabinet | China Sheet Metal Parts | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Custom Electrical Enclosures | China Sheet Metal Fabrication | China Metal Parts Manufacturer